Konica Minolta bizhub C35, Service Manual

Page: 195 / 330

DRAFT
10. SER V ICE MODE Field Service V er. 1.0 Feb. 2010
156
ADJUSTMENT
/
SETTING
10.9.4 Element Page
A. Use
• To print the engine element data information.
• To check the element data.
• See the attached chart listed below for details.
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Print Menu]
→
[Element Page].
3. Select [Print], and touch [OK].
C. Engine element data information
Element data name Description
Inside Humidity • Displays the inside humidity (in 1% increments).
INSIDE TEMPERATURE • Displays the inside temperature (in 1 ºC increments).
PH TEMPRATURE • Displays the PH temperature (in 1 ºC increments).
Sensor Information 1 • Displays the input port status of the sensors and switches in
hexadecimal numbers.
Sensor Information 2
Sensor Information 3
Sensor Information 4
Sensor Information 5
Fuser Heater 1 Temperature • Displays the latest temperature on the middle of the heating roller
(in 1 ºC increments).
Fuser Heater 2 Temperature • Displays the latest temperature at the edges of the heating roller
(in 1 ºC increments).
IDC Sensor 1 PS
• Shows the latest IDC data.
• Range of output: 0
V to 9.99 V (in 0.01 V increments)
IDC Sensor 1 P
TONER LE V EL SENSOR C • Displays the number of times the toner level sensor has detected
an empty condition during one cycle of developer agitation.
• Range of output: 0 to 200 (in increments of one time)
TONER LE V EL SENSOR M
TONER LE V EL SENSOR Y
TONER LE V EL SENSOR K
V DC V olt C • Displays the V dc voltage of each color of toner.
• Range of output: -1000 V to 255 V (in 1 V increments)
V DC V olt M
V DC V olt Y
V DC V olt K
V PP V olt C • Displays the V pp voltage of each color of toner.
• Range of output: 700 V to 2000 V (in 1 V increments)
V PP V olt M
V PP V olt Y
V PP V olt K
V PP V olt Limit C • Displays the limit value of V pp voltage of each color of toner.
• Range of output: 700 V to 2000 V (in 1 V increments)
V PP V olt Limit M
V PP V olt Limit Y
V PP V olt Limit K