Konica Minolta bizhub C35, Service Manual

Page: 245 / 330

DRAFT
14. MALFUNCTION CODE Field Service V er. 1.0 Feb. 2010
206
14.3 Trouble resetting procedure
• To reset a malfunction, turn the power switch OFF and then ON again.
C026 Controller ROM error
(Access error) • Flash ROM access error is detected during the printer
starting.
C027 Controller ROM error
(Data error) • Final check sum error is detected during the printer start-
ing.
C050 HDD access error • When correct access to the hard disk kit is failed during
access.
C051 HDD full error • Range for user space is full during access to the hard disk
kit.
C060 Firmware update error • Firmware update fails to complete correctly during update.
C072 Counter not installed • The total counter (TCT) is not installed.
C080 Memory error • The failure of the RAM on the MFP board occurs.
C900 Successful completion of
counter backup • The counter backup process is completed successfully.
C907 Abnormal end of counter
backup • The counter backup process results in an abnormal end
due to a write error or other reasons.
FF10 • Undetectable
FF20 • Undetectable
FF40 • Undetectable
FF80 • Undetectable
FFFF Interface communication
error • Correct communication is failed when receiving/sending
the command between PRCB and MFPB/2.
Code Description Detection timing