Kongsberg Simrad CS90, Reference Manual

Page: 46 / 686

44
442700/A
(F)
Mouse buttons
These buttons correspond to the two most common buttons on a standard computer
mouse. When an instruction tells you to "select" or "left-click", press the left button.
When an instruction tells you to "right-click", press the right button.
(G)
Up
/
Middle
/
Down
Use these buttons to lower and hoist the transducer.
While the transducer is moving the indicator lamp flashes, and an audible signal is
sounded. When the requested position has been reached, the indicator lamp is lit, and
the audible signal stops.
•
Up
: Press
Up
to hoist the transducer to its upper position.
•
Middle
: Press
Middle
to place the transducer in a predefined middle position.
•
Down
: Press
Down
to lower the transducer to its bottom position.
(H)
Rotary switches
Turn a rotary switch to apply a predefined function. To choose which function to apply
open the
Operating Panel
page. Under
Rotary Switch Options
, assign one function to
each rotary switch on the Operating Panel.
(I)
Place Marker
/
Circle Marker
/
Gear
Use these buttons to place markers in the current active view.
Place Marker
Press
Marker
to place a generic marker in the active view. One or more markers
can be placed in the view to identify specific echoes. Each marker is shown as a
small triangle with or without a short identifying label. It is positioned based on
the two known axes in the view as well as the tilt and bearing of the current ping.
The marker is stationary. It has a specified range, bearing and depth related
to your own vessel. If the echo moves in the display presentation the marker
will not follow.
Circle Marker
Press
Circle Marker
to place a circular marker in the active view. The circle is
drawn with the same diameter as your purse. By means of the circle you can see
the size of the school relative to your purse.
Tip
The
Fishing Gear
function allows you to define the size of your trawl or purse
seine. This function is opened from the
Setup
menu.
Simrad CS90 Reference Manual