Kongsberg Simrad CS90, Reference Manual

Page: 161 / 686

442700/A
159
Procedure
1 Open the
Display
menu.
2 Select
Display Options
.
Observe that the
Display Options
dialog box opens.
3 Select
General
to open the page.
4 In the
Top Bar
list, select the information you want to see on the top bar.
5 Select
OK
to save the selected settings and close the dialog box.
Related topics
Operating procedures, page 79
Defining settings related to user preferences and individual customizing, page 156
General page, page 525
Enabling Coordinated Universal Time (UTC) on the bottom bar
You can set up the CS90 system to show Coordinated Universal Time (UTC). When
disabled, the CS90 system uses local time.
Prerequisites
To enable UTC time, your CS90 system must be set up to accept the NMEA ZDA datagram.
The NMEA ZDA datagram contains the universal time code (UTC), day, month, year and
local time zone.
Context
This is an "on/off" switch. The time is shown on the bottom bar at the bottom of the
display presentation.
Procedure
1 Open the
Display
menu.
2 Select
Display Options
.
Observe that the
Display Options
dialog box opens.
3 Select
General
to open the page.
4 Select
UTC Time
to enable Coordinated Universal Time (UTC).
Operating procedures