230
442700/A
2
Disable the input from the external motion sensor.
a
On the
Setup
menu, select
Installation
.
b
On the left side of the
Installation
dialog box, select
Motion Reference Unit
.
c
Set
Port
to
LAN
to use the internal motion sensor.
d
Set
Protocol
to
EM3000
to match the data format provided by the internal motion
sensor.
e
Select
Apply
and then
OK
to save all the parameters and close the
Installation
dialog box.
3
Open the
Display
menu.
a
Select
Display Options
.
b
Select
General
to open the page.
c
In the
Top Bar
list, enable
Roll
and
Pitch
.
d
On the top bar, read the roll and pitch values.
e
Write down the values.
f
Select
OK
to save the selected settings and close the dialog box.
4
Enable the input from the external motion sensor.
a
On the
Setup
menu, select
Installation
.
b
On the left side of the
Installation
dialog box, select
Motion Reference Unit
.
c
Select the serial port you want to use.
d
Select which protocol (datagram sentence) you want to use.
e
Select the baud rate.
f
Select
Apply
and then
OK
to save all the parameters and close the
Installation
dialog box.
5
Compare the information from the external motion sensor with the information from
the internal sensor.
6
If necessary: Adjust the stabilization offsets.
a
Open the
Setup
menu.
b
Open the
Stabilization
function.
c
Adjust the
Roll Offset
and
Pitch Offset
settings.
Select [
—
] on the left side to decrease the value, or select [
+
] on the right side to
increase.
Simrad CS90 Reference Manual
Summary of Contents for Simrad CS90
