Kongsberg Simrad CS90, Reference Manual

Page: 360 / 686

358
442700/A
The marker is shown as a small triangle with or without a short identifying label. Once an
echo has been provided with a marker in the display presentation it is regarded as an
object .
The position track locks on a position defined by its latitude, longitude and depth. The
bearing and tilt settings are automatically adjusted to compensate for the movements of your
vessel. The bearing line is automatically locked on the object to reflects its bearing. The
marker is stationary. If the echo moves in the display presentation the marker will not follow.
Note
If you change the tilt and bearing settings manually, the position track is disabled.
The priority is identified with a "P". Only one single object can be given priority status.
If you create a new marker and give this priority, the position track is disabled. The same
applies if you start a new target track.
Relevant information about the tracked object can be found in the bottom left corner of the
view. If you think the text is small and hard to read, double-click on the text field. This
will increase the text size.
Deleting a marker
There are two ways to delete a marker. You can use the shortcut menu, or select
Delete
in the
Objects
menu.
Tip
You can delete a single marker, or multiple markers simultaneously, by selecting
Delete
in
the
Objects
menu. If you use
Delete Marker
on the shortcut menu you can only remove
one marker at a time.
1 Place the cursor on the marker you wish to delete.
2 Right-click to open the shortcut menu.
3 Select
Delete Marker
.
or:
1 Open the
Objects
menu.
2 In the list of objects, check the box for the object you wish to delete.
Check
Select All
to select all the markers in the list.
3 Select
Delete
.
Objects menu
The
Objects
menu provides a list of all current objects. This includes all types of objects
including those classified as targets.
Simrad CS90 Reference Manual