Kongsberg Simrad CS90, Reference Manual

Page: 265 / 686

442700/A
263
Result
For each transmit frequency (in kHz), write down the measured noise levels (in dB).
Frequency Maximum Average
70 kHz
80 kHz
90 kHz
Related topics
Maintenance procedures, page 186
Testing the noise conditions and the sonar functionality, page 255
Noise page, page 547
Making a noise/speed curve to determine vessel noise
The performance of the CS90 system will always be limited by different noise sources.
During this test, noise measurements are done for different vessel speeds. The weather and
sea conditions for the noise measurements will be those at the time of the test.
Prerequisites
The CS90 system is turned on and operates normally. The vessel is at sea. Recommended
minimum depth is 100 metres. If the CS90 system is operated from any other compartment
than the bridge, an open two-way oral communication channel with the bridge is required.
You need the following equipment:
• Personal computer
• Spreadsheet program
If you wish to do the test with a "silent ship" the following prerequisites must be met:
• The water must be as deep as possible. Recommended minimum depth is 100 metres.
• There must be no other vessels in the vicinity.
• As much machinery as possible must be turned off. It is particularly important to turn
off electrical motors, as well as cooling systems and hydraulic pumps that may cause
electric noise.
• To prevent interference, all other hydroacoustic instruments must be turned off.
Maintenance procedures