Kongsberg Simrad CS90, Reference Manual

Page: 368 / 686

366
442700/A
Fish Position information pane
The Fish Position information pane shows the position of the detected single fish echoes.
The three circles in the information pane identify the operational frequencies. The echoes
are seen from above. The colours indicate the echo strength.
How to open
Before you open an information pane, you must first click in an Inspection view to make it
"active". The information provided will only be valid for the selected view.
To open the Fish Position information pane, click in the chosen view to activate it, then
select the
Fish Position
button on the top bar. To close the information pane, select it one
more time on the top bar. You can also select
Close
in the top right corner of the pane.
Note
Information panes are only available for Inspection views.
A
The dotted inner circle identifies the low
frequency in the sweep.
B
The circle between them identifies the
centre frequency.
C The outer dotted circle identifies the high
frequency.
Description
Each coloured circle in the information pane
identifies a single fish. You can observe how
these move through the beam. The colours
used are the same as the colours used in
the colour scale, and these indicate the echo
strength from each fish.
Tip
This information pane can be useful during trawling. Keep an eye on the Fish Position
information pane to make sure that you can manoeuvre the trawl through the areas with
most fish.
This is basically the same view as in the Echo Position information pane. However, the fish
echoes are here viewed from above and not from the side.
Simrad CS90 Reference Manual