Komatsu PW160-7K Series, Operation And Maintenance Manual

Page: 6 / 358

SAFETY INFORMATION FOREWORD
6
Noise emission levels
Two labels indicating the machine noise level are affixed on the
machine.
● Sound pressure level at the operator’s station, measured
according to ISO6396 (Dynamic test method, simulated work-
ing cycle).
●
Sound power level emitted by the machine, measured
according to ISO 6395 (Dynamic test method, simulated
working cycle). This is the guaranteed value as specified in
European directive 2000/14/EC.
Vibration levels
When used for its intended purpose, levels of vibration for the
earth-moving machine transmitted from the operator’s seat are
lower than or equal to the tested vibrations for the relative
machinery class in compliance with ISO 7096.
The actual acceleration value for the hands and arms is less than
or equal to 2.5 m/s². The actual acceleration value for the body is
less than or equal to 0.5 m/s².
These values were determined using a representative machine
and measured during the typical operating condition indicated
below according to the measurement procedures that are defined
in the standards ISO 2631/1 and ISO 5349.
71
101