manualshive.com logo in svg

Komatsu PW160-7K Series, Operation And Maintenance Manual

The Komatsu PW160-7K Series is a versatile and efficient hydraulic excavator designed for heavy-duty operations. Ensure optimal performance and longevity of your machine with the comprehensive Operation And Maintenance Manual. Download this essential manual for free at manualshive.com, to unlock valuable insights and instructions for safe and efficient operation.

Share
Download
background image

OPERATION

CONTROL LEVERS, PEDALS

135

 AIR CONDITIONER SWITCH

 

This switch (8) is used to turn the air conditioner (cooling, dehu-
midifying, heating) ON or OFF.

●

When the fan is actuated (the display monitor shows (b)) and
air conditioner switch (8) is pressed, the air conditioner is
switched ON, the lamp at the top of the air conditioner switch
lights up, and the air conditioner starts. When it is pressed
again to the OFF position, the lamp at the top of the air condi-
tioner switch goes out.

●

The air conditioner cannot be operated while the fan is
stopped.

 DEFROSTER SELECTOR LEVER

 

This switch (9) is used in cold or rainy weather to remove the mist
that forms on the front glass.

Selector lever forward: To defroster (open)

Selector lever back: Closed

The defroster can be used when the vent selector switch is set to
face or face and foot.

METHOD OF OPERATION

The air conditioner can be operated automatically or manually.
Select the method of operation as desired.

 AUTOMATIC OPERATION

 

1.

Turn auto switch (5) ON.

❍

The lamp at the top of switch (5) lights up.

❍

The set temperature (a) and air flow (b) are displayed on
the monitor.

Open

Close

Summary of Contents for PW160-7K Series







































































































































































































































































































































































Reviews:

No comments

Related manuals for PW160-7K Series

Wacker Neuson 1000164553 Operator'S Manual preview
1000164553
Brand: Wacker Neuson Pages: 188
Fiat Kobelco EX355 Tier2 Technical Manual preview
EX355 Tier2
Brand: Fiat Kobelco Pages: 968
mecalac 14 MBX Handbook Of Repair preview
14 MBX
Brand: mecalac Pages: 82
mecalac 12 MXT Handbook preview
12 MXT
Brand: mecalac Pages: 88
Fraco SEH 4500 Assembly And Operating Manual preview
SEH 4500
Brand: Fraco Pages: 69

Brands by name

Popular brands

Load more brands