manualshive.com logo in svg

Komatsu PW160-7K Series, Operation And Maintenance Manual

The Komatsu PW160-7K Series is a versatile and efficient hydraulic excavator designed for heavy-duty operations. Ensure optimal performance and longevity of your machine with the comprehensive Operation And Maintenance Manual. Download this essential manual for free at manualshive.com, to unlock valuable insights and instructions for safe and efficient operation.

Share
Download
background image

OPERATIONS AND CHECKS BEFORE STARTING ENGINE

OPERATION

184

 Prohibited operations using dropping force of bucket

Do not use the dropping force of the bucket as a pickaxe, breaker,
or pile driver. This will bring excessive force to bear on the rear of
the machine, and will not only damage the machine, but is also
dangerous.

 Prohibited operations using dropping force of machine

Do not use the dropping force of the machine for digging.

 Digging rocky ground

It is better to excavate hard rocky ground after breaking it up by
some other means. This will not only reduce damage to the
machine but make for better economy.

PRECAUTIONS FOR OPERATION

 PRECAUTIONS WHEN TRAVELLING

When travelling over obstacles such as boulders or tree stumps,
ensure sufficient clearance to avoid undercarriage damage. As
far as possible, remove such obstacles or avoid travelling over
them.

Do not operate machine (working or travelling) on 1 tyre (if twin
tyres are fitted) after a puncture as this puts excessive load onto
the one remaining tyre.

To prevent loss of control refrain from travelling fast over rough
ground. 

INCORRECT

INCORRECT

INCORRECT

INCORRECT

 

Summary of Contents for PW160-7K Series







































































































































































































































































































































































Reviews:

No comments

Related manuals for PW160-7K Series

Kubota KX080-3 Operator'S Manual preview
KX080-3
Brand: Kubota Pages: 115
P.Lindberg 9064762 Manual preview
9064762
Brand: P.Lindberg Pages: 123
Mobility 2BB-EVO FP Series Fitting And Service Handbook preview
2BB-EVO FP Series
Brand: Mobility Pages: 60
Hyundai Elevator LXVF7 Manual preview
LXVF7
Brand: Hyundai Elevator Pages: 53
Case CX350C Service Manual preview
CX350C
Brand: Case Pages: 22

Brands by name

Popular brands

Load more brands