Kollmorgen MMC Smart Drive Series, Hardware Manual

Page: 347 / 386

Kollmorgen - June 2014 345
MMC Smart Drive Hardware Manual
-
DRIVE RESIDENT DIGITAL MMC CONTROL
Figure 13-3: Block I/O Breakout Box Dimensions
13.5.3 User Port
The 15-pin HD male D-sub User Port connector (labeled “C3” on the front of the
Control) provides RS232 and RS485 serial communication between a serial device
and the Control. The User Port provides RS232/RS485 communications at Baud rates
to 115.2 K with Multidrop capability.
• Pin descriptions are provided in Table 13-8
• Pin assignments are provided in Table 13-9
• The available Flying Lead cable is described in Table 13-10.
• The available RS-232 Exter HMI cable is described in Table 13-11.
• The available RS-485 Exter HMI cable is described in Table 13-12.
• Available Breakout Boxes and Cables are described in Table 13-13 .
• Breakout Box dimensions are shown in Figure 13-4
1.750”
2.250”
3.000”
1
6
1.750”
5
9