Kohler APM402, Operation

Page: 61 / 172

TP-6694 9/20 61
Menu Name
Controller
Viewable
Controller
Adjustable
SiteTech
Adjustable
Overview X
Engine Metering X
Generator Metering X X
GenSet Information X X
GenSet Run Time X
GenSet System X X X
Voltage Regulation X X X
Digital Inputs X X
Digital Outputs X X
Analog Inputs X X
Event Log X
Volt Select X X X*
* Requires initial activation using SiteTech™
Figure 27 Displays for Viewing and Adjusting (DEC3000 Firmware Version 3.0.25 to 4.8.4)
Menu Name
Controller
Viewable
Controller
Adjustable
SiteTech
Adjustable
Overview X
Engine Metering Menu X
Generator Metering X X
GenSet Information X X
GenSet Run Time X
GenSet System X X X
Voltage Regulation X X X
Digital Inputs X X
Digital Outputs X X
Analog Inputs X X
Battery Charger 1 X X
Battery Charger 2 X X
Event Log X
Volt Select X X X*
* Requires initial activation using SiteTech™
Figure 28 Menu Displays for Viewing and Adjusting (DEC3000 Firmware Version 3.0.25 to 4.8.4)
See the section titled: Specifications and Features, to review set point ranges and default settings for comparison to the actual
setup.
Menus displaying the # symbol represent one of the following data types:

System-calculated data

System-measured data

User-entered data
Note:
The examples given on the following pages represent digital displays with the Measurement System set to English. Some
displays are engine-dependent. Refer to the Appendix titled: Controller Displays from the Engine ECM.