Kohler APM402, Operation

Page: 58 / 172

58 TP-6694 9/20
Menu Summary List Continued (Legend: ● First level submenu, ○ second level submenu)
Voltage Regulator Menu
(DEC3000 before
Version 3.0.25)
Digital Inputs Menu Analog Inputs Menu Event Log Menu

Enter Voltage Regulator?
(Yes or No) *
o
Voltage Regulator
Adjust
o
Exit Voltage Regulator

DIn A1

DIn A2

DIn A3 (Reserved for
Enclosure Temperature: High
Shutdown on select Telecom
units only)

AIn A1 (factory
reserved and not user
programmable)

AIn A2

AIn B1 (with I/O
Board)

AIn B2 (with I/O
Board)

See the section titled:
Controller Fault
Diagnostics for a list of
items that can appear in
Event Log
Volt Select Menu (DEC3000
Version 2.8.22 or higher, and
APM402)
Voltage Regulator Menu
(DEC3000 Version 3.0.25
or higher, and APM402)

DIn B1 (with I/O Board)

DIn B2 (with I/O Board)

Volt Select: *
o
120/240 V 1 Ph
o
120/208 V 3 Ph
o
139/240 V 3 Ph
o
277/480 V 3 Ph
o
120/240 V 3 Ph

Voltage Regulator Voltage
Adjust *

Reset Voltage Regulator
Settings *
o
Reset Voltage
Regulator?
Digital Outputs Menu

DOut A1

DOut B1 (with I/O Board)

DOut B2 (with I/O Board)

DOut B3 (with I/O Board)

DOut B4 (with I/O Board)

DOut B5 (with I/O Board)
Battery Charger 1 Menu

Output Volts

Output Amps

Charger State

Software Version

Reduced Out

Temperature
Compensation
Battery Charger 2 Menu

Output Volts

Output Amps

Charger State

Software Version

Reduced Out

Temperature
Compensation
* User-Defined (changeable) Menu Displays. Use SiteTech
™ software to change other settings including User-Defined Menu Displays.
NOTE:
Some changes require activating the calibration or adjustment mode. Some displays may only appear when in the calibration or adjustment
mode. Refer to the section titled: Reviewing Menu Displays to activate the calibration or adjustment mode.