Koden KRD-10, Operation Manual, Page: 98 / 130

Chapter 4 Setup Procedure KRD-10
4-32 0093170212-01
The following formats can be selected.
1) NMEA0183 Ver2.0
2) NMEA0183 Ver3.0
* DATA1 is Output only
* Input data will be used as output as is except for data created by this Display unit.
In the case
“DATA2” of “1: Connector”
(4) Press [ ] or [ ] key to move cursor onto the output data format to select
“DATA2”.
(5) Press key.
Initial setup: NMEA 0183 Ver.2.0
The following formats can be selected.
1) NMEA0183 Ver2.0
2) NMEA0183 Ver3.0
4.6.4 Setting the Baud rate
You can change the Baud rate of DATA1 and DATA2.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
8: Interface
”.
(3) Press key to select
“
4: Baud rate
”.
(4) Press [ ] or [ ] key to move cursor onto the baud rate
“4800”, “9600”, “19200”, “38400”.
(5) Press key.
ENT
ENT
8/S
4/W
MENU
Press
3
CAUTION
When initializing GPS compass V104S, The baud
rate menu of the DATA 2 connector automatically
becomes 38400 and it becomes invalid.