Koden KRD-10, Operation Manual, Page: 96 / 130

Chapter 4 Setup Procedure KRD-10
4-30 0093170212-01
4.6
Menu 8: Interface
4.6.1 Selecting a DATA port to setting.
You can select the format of output data. (Only DATA 2 port: input / output)
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
8: Interface
”.
(3) Press key to select
“
1: Connector
”.
(4) Press [ ] or [ ] key to move cursor onto the data port to select
“DATA1” or “DATA2”.
(5) Press key.
4.6.2 When initializing the device connected to DATA2 port
After selecting the DATA2 connector by the above operation, you can initialize the GPS compass to be
connected by the following operation. Also, if you do not need initialization, please select the
"standard".
When DATA 1 is selected, this function is invalid and operation is impossible.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
8: Interface
”.
(3) Press key to select
“
2: Initialize
”.
(4) Press [ ] or [ ] key to move cursor onto the initiaalize to select
“Standard”, “Compass V140s”.
(5) Press key.
MENU
ENT
8/S
1
DATA1 DATA2
Press
1
ENT
8/S
2/N
MENU