Koden KRD-10, Operation Manual, Page: 119 / 130

KRD-10 Chapter 7 Installation
0093170212-01 7-7
7.6 Connector pin outs
(DATA1 and DATA 2 port)
This port is general data output port. Output data is selected by the menu
“8: Interface”
.
Note:
“8: Interface”: Refer to “Chapter 4.6
Menu 8
: Interface”
POWER
1: F.GND
2: DC +
3: DC -
2
4 3
1
5
1: GND/SHIELD
2: TXD (+)
3: TXD (-)
4: RXD (+)
5: RXD (-)
6: +15V (Maximum 300 mA)
DATA1
1 5
6
2
3
4
DATA 2
1
5
6
2
3
4
1: GND/SHIELD
2: TXD (+)
3: TXD (-)
4: RXD (+)
5: RXD (-)
6: +15V (Maximum 300 mA)
CAUTION
The maximum current capacity is 300 mA in total, then it should not exceed.
Take care that the grand total of each connector does not exceed 300 mA.
CAUTION
When the output power (6 pin, +15V) of DATA1 or DATA2 is supplied to
external devices, connect the external power line (+) to the 6 pin (+15V) and
the external power line (-) to the 1 pin (GND/SHIELD).
Do not connect the external shield line to the 1 pin (GND/SHIELD)