Koden KRD-10, Operation Manual, Page: 39 / 130

KRD-10 Chapter 2 Various Navigation
0093170212-01 2-3
2.1.2 Copying a position
You can copy the position data (stored with numbers 0000 to 9999) to the waypoint data (having
numbers 1000 to 9999).
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
1: Waypoints
”.
(3) Enter storage number (0000 to 9999) by numeric keys and press key.
(4) Press key to display the pop-up.
(5) Select [ Copy ] in the pop-up and press key.
(6) Enter a source point number (1000 to 9999) by numeric keys.
(7) Press key to copy the storage data.
2.1.3 Erasing a single waypoint
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
1: Waypoints
”.
(3) Enter storage number (0001 to 9999) by numeric keys and press key.
(4) Press key to display the pop-up.
(5) Select [ Delete ] in the pop-up and press key.
(6) If OK, select [ Yes ] in the pop-up and press key.
If cancel erasing, select [ No ] in the pop-up and press key.
NOTE: To erase an entire data from memory
simultaneously, see
“WPT. / Route
clear
” (page 6-5).
Enter the number of the copy destination
Information of the copy destination
Original number
MENU
1
ENT
ENT
ENT
Press
ENT
Press
ENT
MENU
1
ENT
ENT
ENT
ENT
ENT
ENT