Koden KRD-10, Operation Manual, Page: 80 / 130

Chapter 4 Setup Procedure KRD-10
4-14 0093170212-01
4.4 Menu 6: Calculation
4.4.1 Calculating the distance and bearing between two points
You can calculate the distance and bearing between two points stored in memory.
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
6: Calculation
”.
(3) Press
key to select “
1: 2Points
”.
(4) Enter a (4-digit) origin WPT number (0000 to 9999).
(6) Press key.
(7) Press [ ] key.
(7) Enter a (4-digit) final WPT number (0000 to 9999).
(8) Enter “N” for north or “S” for south latitude.
(9) Press key.
4.4.2 Calculating LOP based on LAT/LONG data
You can enter a Loran C or Loran A or DECCA chain number and two secondary stations,
NAVIGATOR calculates the LOPs based on the specified LAT/LONG data and displays the LOP
values.
To change the
“
2: LOP
”
, the following settings are required
You can set of LoranA, LoranC or Decca of “ 2: LOP
” change when you changed
8:Lop and
9:Chain in the Menu7: Initial setup.
(1) Press key until Menu options 1 to 9 appears.
(2) Press
key to select “
7: Initial setup
”.
(3) Press
key to select “
8: Lop
”.
(4) Setting
“LoranA” or “LoranC” or “Decca”
(5) Press key.
(6) Press [ ] key to input Chain number.
Select Loran C: Set the (4-digit) chain number, and the first digit of two slave stations by numeric keys.
Select Loran A / Decca: Select the chain number and the slave stations in the pop-up.
ENT
1
MENU
6/E
8/S
MENU
7
ENT
ENT
: input item
Press
1/N
Origin WPT Final WPT
Distance from origin WPT
To final WPT Bearing from origin WPT
To final WPT