Koden KRD-10, Operation Manual, Page: 107 / 130

KRD-10 Chapter 6 Data backup and initialization
0093170212-01 6-1
Chapter 6 Data backup and initialization
6.1 Data backup
You can back up the waypoint/route data and setting values by USB memory.
6.1.1 Displaying the
“Data backup” menu
The procedure is as follows:
(1) Press key and Power ON.
(2) Release your finger from key when appear opening screen.
6.1.2 Insert USB memory
Insert USB memory in the USB connector of the rear panel, and confirm USB mark on the display.
6.1.3 Read out of data
In the case
“Read out of Waypoint / Route data”
(1)
Press [ ] or [ ] key to move cursor onto the “Read out of Waypoint / Route data”.
(2) Press key.
(3) Select
“Yes” in the pop-up and press key.
(4) If a message of
“Read out complete” appears, it is completed.
*The name of data file is
“KM-F83_WPT_RTE.dat”.
7
ENT
7
ENT
NOTE: If USB mark is not appear,
Change USB memory for new one.
USB connector
USB mark