Koden KRD-10, Operation Manual, Page: 57 / 130

KRD-10 Chapter 2 Various Navigation
0093170212-01 2-21
2.6.2 Canceling anchor position
(1) Press key until screen 1 to screen 9 appears.
(2) Press key.
(3) If OK, select [ Yes ] in the pop-up and press key.
If Cancel, select [ No ] in the pop-up and press key.
2.7 Track display
You can display track, the waypoint, course line, and cross cursor on the NAV6 screen.
2.7.1 Display a cross cursor on Plotter screen
You can display a cursor and position it on the screen.
(How to use cross cursor)
(1) When the plotter screen is selected, press key until Plotter screen appears.
(2) Press key, cursor appears.
(3) Press [ ] key to move display cursor.
Move quickly display cursor by pressing a long time [ ] key
(4) Press key, cursor disappears.
CLR
MODE
MODE
ENT
ENT
ENT
cursor appear
Press Long time
Key board cursor
Display cursor
Press
Key board cursor
Display cursor
Move
Display cursor is gradually faster
Press
ENT
CLR