Koden KRD-10, Operation Manual, Page: 87 / 130

KRD-10 Chapter 4 Setup Procedure
0093170212-01 4-21
4.5 Menu 7: Initial setup
4.5.1 Setting average constants (measuring position, speed and course)
Use the averaging function to compare GNSS sensor signals several times and get their average.
This stabilizes the GNSS position (latitude and longitude), speed and course data. The maximum
averaging rate is “6” and the minimum averaging rate is “0”. When you select “6” value, data is
averaged more often and the display data has smaller variations. However, delays for updating occur.
When you select a “0” value, data is averaged less but the display data responds quicker.
Selecting a constant (averaging constant) suitable for your boat speed will provide you with smoother
data of the boat position, course and speed.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
1: Averaging
”.
(4) Press key to select
“
1: Averaging (COG/SOG)
”.
(5) Press [ ] or [ ] key to move cursor onto the average constants to select
“0 to 6”.
(6) Press key.
Initial setup: 4
Average constants
0: OFF, 1: 3 times average, 2: 6 times average, 3: 12 times average, 4: 18 times average,
5: 24 times average, 6: 30 times average
4.5.2 Setting average constants (Ship heading)
Use the averaging function to compare GPS compass sensor signals several times and get their
average.
This stabilizes the ship heading data from GPS compass. The maximum averaging rate is “6” and the
minimum avera
ging rate is “0”. When you select “6” value, data is averaged more often and the display
MENU
7
1
Press
1
ENT
1
Press
1
1