Koden KRD-10, Operation Manual, Page: 55 / 130

KRD-10 Chapter 2 Various Navigation
0093170212-01 2-19
(4) Press [ ] key to display
“
RNG
” and “
TTG
”.
2.6 Setting an anchor position
After arriving at your destination, it is possible to drift from the anchor position due to a tide or wind.
Once the anchor position is stored in memory, it is easy to check the distance and bearing moved from
the anchor position.
2.6.1 Storing an anchor position
When the current position information is input from the outside, you can set the anchor position from
the screen 1 to screen 9.
The following operations allow you to store and specify the current position as the anchor position. The
anchor position is registered to memory number A9997 along with the comment.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
5: Alarms
”.
(3) Press key to select
“
2: ANCH
”.
(6) Select [ ON ] in the pop-up and press key.
5
2/N
MENU
ENT
Press
5