Koden KRD-10, Operation Manual, Page: 40 / 130

Chapter 2 Various Navigation KRD-10
2-4 0093170212-01
2.2 Setup of waypoint navigation
2.2.1 Setting waypoint navigation
The position data for each waypoint must be set prior to navigating to waypoints. You can use the data
already stored from Menu, or you can set the waypoints on screen 1 to screen 9 (called the quick
waypoint navigation).
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
1: Waypoints
”.
(3) Enter storage number (0000 to 9999) by numeric keys and press key.
(4) Press key to display the pop-up.
(5) Select [ Set ] in the pop-up and press key.
(6) Number is surrounded by square.
2.2.2 Quick waypoint setup
Quick WPT (first priority waypoint) can be set by specifying it directly either from the screen 1 to screen
9. When the new waypoint is selected, the waypoint navigation to it will commence and the specified
position, along with the comment ( QUICK ), will be assigned to the position number 9998. Old data is
replaced with a new during quick WPT setup.
While the pages of either the screen 1 to screen 9 are displayed.
(1) Press key to display
“
QUICK
” pop-up menu.
0
Press
ENT
NOTE: Press to backspace the
cursor to correct an input
error.
NOTE: Press to clear incorrect
Input. You can reenter
Numeric data.
CLR
MENU
1
ENT
ENT
ENT