Koden KRD-10, Operation Manual, Page: 92 / 130

Chapter 4 Setup Procedure KRD-10
4-26 0093170212-01
4.5.8 Changing sail mode
You can change the navigation mode. There are two navigation modes.
Great Circle course : The shortest course on a sphere.
Rhumb Line course : Straight course on a Mercator chart.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
3: Sailing mode
”.
(4)
Press [ ] or [ ] key to move cursor onto the sail mode to “Great circle”, “Rhumb Line”.
(5) Press key.
Initial setup: Great circle
4.5.9 Displaying position data in LAT/LONG mode
You can change the displaying position data,
“LAT/LONG” or “Lop”.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
4: Position
”.
(4) Press [ ] or [ ] key to move cursor
to “L/L”, “Lop”.
(5) Press key.
Initial setup: L/L
4.5.10 Changing the latitude and longitudinal display digits
The following operations enable to display the latitude and longitude of present position 0.0001 or
0.001minute.
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
5: L/L units
”.
(4)
Press [ ] or [ ] key to move cursor to “.001”, “.0001”.
(5) Press key.
7
3
MENU
ENT
7
4/W
ENT
MENU
7
5
ENT
MENU
Press
3
Press
4/W