Koden KRD-10, Operation Manual, Page: 93 / 130

KRD-10 Chapter 4 Setup Procedure
0093170212-01 4-27
Initial setup: .000
1’
4.5.11 Selecting GNSS source
This menu is externally fixed. By inputting NMEA data from DATA 2, it can be used as a display monitor
for external equipment.
Initial setup: External
’
4.5.12 Selecting a Language
You can select the language from the pop-up.
The procedure is as follows:
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
7:
Language
”.
(4) Press [ ] or [ ] key to move cursor onto the language.
(5) Press key.
Initial setup: English
4.5.13 Specifying the chain and secondary stations for Loran C, Loran A or
Decca
For the operating procedure, refer to 5.1 "Initial setup for LOP display".
The procedure is as follows:
(1) Press key until Menu options 1 to 9 appears.
(2) Press key to select
“
7: Initial setup
”.
(3) Press key to select
“
8: Lop
”.
In the case
“LoranC”
(4)
Press [ ] or [ ] key to move cursor onto the “LoranC”.
(5) Press key.
7
7
ENT
MENU
7
8/S
ENT
MENU
Press
5
Press
7