Koden KRD-10, Operation Manual, Page: 111 / 130

KRD-10 Chapter 6 Data backup and initialization
0093170212-01 6-5
6.2.3 WPT. / Route clear
You can erase the entire data such as waypoints, events, POB, and routes from internal memory.
(1)
Press [ ] or [ ] key to move cursor onto the “WPT. / Route clear”.
(2) Press key.
(3) Select
“Yes” in the pop-up and press key.
(4) Press key to exit initial menu.
6.2.4 Changing a storing method for present position (Event)
You can use either of the following two procedures for registering your current position (Event).
(1)
Press [ ] or [ ] key to move cursor onto the “Event”.
(2) Press key.
(3) Select
“Auto” or “Manual” in the pop-up and press key.
(4) Press key to exit initial menu.
AUTO: Pressing the EVT key automatically registers the points starting from No. 0001
to 0999. When the 1000th point is reached, the number is returned to 0001 again
and the older data is sequentially replaced by the newer one.
MANUAL: Press the EVT key, then specify desired registration numbers (in the range of 0001
to 0999) by numeric keys.
initial setup: AUTO
ENT
ENT
MODE
Note: If you want to go back up for before clear data,
Please write Waypoint/Route data to USB memory.
Refer page 6-1/2
ENT
ENT
MODE
Press
ENT
Press
ENT