Koden KRD-10, Operation Manual, Page: 20 / 130

Chapter 1 Basic Operation KRD-10
1-2 0093170212-01
1.2 Power On/Off
1.3 Adjusting brightness of display and panel key
Press to power on.
Initial message appears during power-on.
The receiver is performing the self-check.
Press until [Power off 3sec] is displayed for turn NAVIGATOR off.
All data before power-off is kept in memory for later use.
NOTE: This setup is memorized and turns into the same setup next time at the time of a power
supply ON.
BRILL
BRILL
Press to change the LCD brightness in 7 levels.
After the popup of below was displayed, push the key.
BRILL
Blink when NAVIGATOR is searching GPS
satellites.
Blinking
When NAVIGATOR receives signals from 3
or more satellites, it displays present latitude
and longitude position with solid N (or S) and
W (or E).
No blinking