Knick Stratos Pro A401B PH, User Manual

Page: 36 / 196

36
Measuring Mode
After the operating voltage has been connected, the analyzer auto-
matically goes to “Measuring“ mode. To call the measuring mode from
another operating mode (e.g. Diagnostics, Service): Hold meas key
depressed (> 2 s).
Depending on the configuration, one of the following displays can be
set as standard display for the measuring mode (see page 38):
• Measured value, time and temperature (default setting)
• Measured value and selection of parameter set A/B or flow
Measured value and tag number (“TAG”)
• Time and date
• Output currents
• Controller
Upper display: controller output Y, lower display: setpoint
Note: By pressing the meas key in measuring mode you can view the
displays for approx. 60 sec.
You must configure the device for the respective measurement
task!
Sensoface indicator
(sensor status)
Time
(or flow)
Mode indicator
(measuring)
Hold meas key
depressed for calling
the measuring mode
(pressing once more
switches the display)
Active
parameter set
(configuration)
Display indicates
OUT1: e.g.
process variable
Display indicates
OUT2: e.g.
temperature
enter key