Knick Stratos Pro A401B PH User Manual Download Page 176

Page: 176 / 196

176

Sensoface

Display Problem

Status

Asymmetry

potential and

slope

Asymmetry potential (zero)

and slope of the sensor are

still okay.

The sensor should be replaced

soon.

Asymmetry potential and

slope of the sensor have

reached values which no lon-

ger ensure proper calibration.

Replace sensor.

Calibration

timer

Over 80% of the calibration

interval has already past.

The calibration interval has

been exceeded.

Sensor defect

Check the sensor and its

connections (see also Error

Messages Err 15 and Err 16).

Response

time

Sensor response time has

increased.

The sensor should be replaced

soon.

To achieve an improvement, clean

the sensor and soak it in buffer.

Sensor response time signifi-

cantly increased ( > 72 s, cali-

bration aborted after 120 s)

Replace sensor.

Summary of Contents for Stratos Pro A401B PH





































































































































































































Search results

Summary of Contents for Stratos Pro A401B PH

Reviews:

Brands by name

Popular brands

Knick Stratos Pro A401B PH, User Manual

Search results

Summary of Contents for Stratos Pro A401B PH

Reviews:

Brands by name

Popular brands