Knick Stratos Pro A401B PH, User Manual

Page: 135 / 196

135
Measurement
Display Remark
or AM/PM and °F:
From the configuration or calibration menus,
you can switch the device to measuring
mode by pressing the meas key.
In the measuring mode the main display
shows the configured process variable (pH,
ORP [mV], or temperature), the second-
ary display shows the time and the second
configured process variable (pH, ORP [mV],
or temperature). The [meas] mode indicator
lights and the active parameter set (A/B) is
indicated.
Please note:
• After prolonged power outage (> 5 days)
the time display is replaced by dashes and
cannot be used for processing.
Enter the correct time.
By pressing the meas key you can step through the following
displays. When no key has been pressed for 60 sec, the device
returns to the MAIN DISPLAY.
1) Selecting the parameter set
(if set to “manual“ in the configuration).
Select the desired parameter set using
the

arrow keys (PARSET A or PARSET B
blinks in the lower display line).
Press enter to confirm.
Further displays
(each with meas).
2) Display of tag number (“TAG“)
3) Display of time and date