![background image](http://html.mh-extra.com/html/kitchenaid/kgra806p/kgra806p_technical-education_198259041.webp)
4-15
5.
To remove the broil burner:
a) Remove the ignitor from the broil burner
(see step 4).
b) Remove the rear screw from the broil
burner.
c) Loosen the front broil burner screw,
slide the burner off the orifice, and
remove the burner.
Rear Screw
Front Screw
Orifice
6.
To remove the Halo
broil element:
a) Remove the front screw from the broil
burner and allow it to drop down.
b) Remove the rear screws from the Halo
broil element.
c) Pull the Halo
broil element forward so
that the element terminal wires are in-
side the oven cavity, and disconnect
the wires from the terminals.
Broil Burner
Halo
Broil Element
Front Screw
Rear Screw
Rear Screw
Element Wires
Summary of Contents for KGRA806P
