![background image](http://html.mh-extra.com/html/kitchenaid/kgra806p/kgra806p_technical-education_198259035.webp)
4-9
REMOVING THE COOKTOP, AND A
SURFACE BURNER & IGNITOR
Standard
Burner Head
W/2 Screws
1.
Unplug range or disconnect power.
2.
Turn off gas supply to range.
3.
Pull the range out of its mounting location
so that you can access the rear of the unit.
4.
Remove the grates, the vent cover, and
the burner caps from the top of the range.
5.
Remove the two screws from each of the
standard burner heads and lift the heads
off the cooktop.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
8.
To remove the cooktop:
a) Remove the screws from the left, right,
and rear trim pieces and remove the
trim from around the cooktop.
6.
Remove the four burner ring Torx screws
from the TripleTier
Burner and lift the ring
off the cooktop.
7.
Remove the three TripleTier
Burner base
cover Torx screws and remove the cover.
Continued on the next page.
Standard Burners
TripleTier
Burner
T/T Burner
Ring
Screw
(1 of 4)
T/T Burner
Base Cover
Screw
(1 of 3)
Rear Trim
Screws
Side Trim
Screws
Summary of Contents for KGRA806P
