![background image](http://html.mh-extra.com/html/kitchenaid/kgra806p/kgra806p_technical-education_198259036.webp)
4-10
f) Remove the screw from the ignitor.
9.
To remove a standard surface burner
and ignitor:
a) Remove the cooktop (see step 8).
b) Remove the gas line.
c) Disconnect the ignitor wire from the
terminal.
d) Remove the two bracket screws from
the burner box.
e) Remove the two hex-head bracket
screws and remove the burner from the
bracket.
b) Lift the rear of the cooktop off the unit,
and set it aside.
Gas Line Nut
Ignitor Wire
Bracket Screw (1 of 2)
Surface Burner
Bracket Screws
Ignitor Screw
10.
To remove the TripleTier
Burner base
and ignitor:
a) Remove the cooktop (see step 8).
b) Remove the two gas lines.
Gas Line Nuts
Summary of Contents for KGRA806P
