KitchenAid KGRA806P, Technical Education

Page: 29 / 84

4-3
7. To remove the user interface:
a) Remove the electronic oven control
assembly (see steps 5 or 6).
b) Remove the four machine screws from
the control panel mounting brackets,
and remove the user interface and its
bracket.
4 Machine Screws
Interface Bracket
Electronic Oven Control (EOC) Assembly
User Interface
Cooktop Trim & 2 Screws
Slide Back
6. To remove the electronic oven control
(EOC) assembly on freestanding models:
a) Open the oven door, and remove the
screws from the bottom of the control
panel (see the photo in step 5c).
b) Remove the two cooktop trim screws.
c) Slide the cooktop trim back to expose
the end cap screw, and remove the
screws (1 on each side).
d) Perform steps 5d, 5e, and 5f on page 4-2
to remove the EOC assembly.
Control Panel
End Cap Screw
End Cap