![background image](http://html.mh-extra.com/html/kitchenaid/kgra806p/kgra806p_technical-education_198259018.webp)
2-6
8.
To convert the bake burner for use with
L.P. gas:
a) Remove the bake burner from the gas
distribution valve orifice (see page 4-16
for the procedure).
b) Use a 1/2
″
open-end wrench and turn
the bake burner orifice hood down snug
onto the pin (approximately 2-1/2 turns).
DO NOT OVERTIGHTEN THE ORI-
FICE.
The burner flame cannot be prop-
erly adjusted if this conversion is not
made.
Broil Burner Orifice
Bake Burner Orifice Hood
9.
To convert the gas distribution valve
for use with L.P. gas:
a) Remove the storage drawer from the
range.
Gas Distribution Valve
5.
Place the natural gas orifices in the orifice
card holes.
6.
Replace the burner caps and grates.
7.
To convert the broil burner for use with
L.P. gas:
a) Open the oven door and remove the
oven racks.
b) Use a 1/2
″
open-end wrench and turn
the orifice hood down snug onto the pin
(approximately 2-1/2 turns).
DO NOT
OVERTIGHTEN THE ORIFICE.
The
burner flame cannot be properly ad-
justed if this conversion is not made.
c) Reinstall the oven racks and close the
oven door.
Pin
Orifice
Hood
Natural Gas:
Increases Flame Size
In This Direction
L.P. Gas:
Increases Flame Size
In This Direction
Summary of Contents for KGRA806P
