![background image](http://html.mh-extra.com/html/kitchenaid/kgra806p/kgra806p_technical-education_198259051.webp)
4-25
REMOVING A SIDE PANEL
1.
Unplug range or disconnect power.
2.
Turn off gas supply to range.
3.
Pull the range out of its mounting location
so that you can access the rear of the unit.
4.
Remove the top bracket (see page 4-12
for the procedure).
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
5.
Remove the bottom rear screw for the side
panel you are removing.
6.
Pull the back of the side panel out so it
clears the support bracket, then slide the
panel back until the top and bottom sup-
ports are in the panel cutouts, then re-
move the panel.
Top Support
Bottom Support
Left Side
Panel Screw
Top Cutout
Bottom Cutout
Summary of Contents for KGRA806P
