FP 25/30/38/50 E
Issue: 06/2011
75
6 .3
Maintenance
Every 3 months
Component
What is to do?
Lens holder
Lubricate the lens holder guidance with Cardan oil,
type 8657
Aperture changer
(if installed)
Clean the part of the shaft above the film path with a cloth,
and the threaded part of the shaft (inside the back cover) with
a brush. After cleaning lubricate the threaded part of the shaft
with ball bearing grease or Esso universal oil.
Do not lubricate the brass tube/non threaded parts of shaft!
Every 6 months
Component
What is to do?
Reverse-scan sound
device
Check O-rings on sound pressure roller.
Check all rollers, whether they run easily.
Annually
Component
What is to do?
Sound reproducer
Lubricate the pressure roller ball bearings with a drop of
Cardan oil, type 8657.
Do not use any other lubricant!
Lubricate the sound drum shaft with 1 drop of Esso
universal oil.
X
NOTE
Z
Cardan oil is very pasty therefore the ball bearings will be retarded for a proper film
run. By getting move the guide roller with one finger, the roller has to stop at last
after a half of turn. Otherwise you have to clean the bearing and then fill it with
Cardan oil.
Z
You must not use any oil or grease!
Water cooling (if existing) Empty and clean and refill coolant. Check whether pump
and refrigeration system are sealed and working properly.
Repair and Adjustments
Summary of Contents for FP 25 E PREMIERE
