FP 25 E
Issue: 06/2011
62
• Start and accelerate the spool operation by turning the rotary switch clockwise.
$
At start the green indicator LED illuminates constantly.
ATTENTION
For a safe and gentle film reeling the spool operation will be activated as soon as the
rotary switch was turned to zero-position.
• Splice the film beginning of the next copy with the film end of the first copy.
• Wind-up the second copy as described before.
• Do also with all other copies.
X
NOTE·
Z
At the end of a copy or when a film break is detected, the operation will be switched
off automatically.
Z
After you have made up your program, the beginning of the program is inside of the
rear reel, therefore you have to rewind the whole program, see next chapter.
5 .3 .1 .3 Rewinding the Program
• Switch on the power supply - main switch position “I”.
• Position the operating mode rotary switch to
.
• Adjust the spool size toggle switch depending on
(600 m) or
(- 5000 m).
• If the FP 25 E is equipped with the optional spool rack and two friction drives for
rewinding set the rotary switch to position
Rewind
.
• If necessary, put a distance disk on the fore side friction shaft.
• Always rewind from the fore side full take-off spool to the rear empty take-up spool.
• Thread the film corresponding to the threading instructions.
• Turn the speed rotary switch anticlockwise to the zero-position (left position) and wait
until the green indicator LED illuminates.
• Start and accelerate the spool operation by turning the rotary switch clockwise.
$
At start the green indicator LED illuminates constantly.
ATTENTION
U
For a safe and gentle film reeling the spool operation will be activated as soon as
the rotary switch was turned to zero-position.
U
The rewind operation can only be activated when the spools completely stand still.
E. g. after making up the program press the stop button and wait until the spools
stand still, then start rewind operation by turning the rotary switch.
Summary of Contents for FP 25 E PREMIERE
