FP 25/30/38/50 E
Issue: 06/2011
74
Every 2 weeks
Component
What is to do?
Ceramics roller
Remove the ceramics rollers and then remove the dirt in the
holes by using air pressure. Clean the ceramics roller with a
alcohol moisturized cloth.
Every 3 months
Component
What is to do?
Film break sensor
Clean the film break sensor with a soft cloth.
Main drive motor / fan Blow out the dust with pressurized air.
Guide rollers
Clean the guide rollers and roller shafts with alcohol.
Spool shafts
Lubricate with Esso universal oil.
Every 6 months
Component
What is to do?
Shutter /
shutter housing
Clean the shutter housing with pressurized air.
Clean shutter edges with a soft toothbrush.
Lens turret (if existing) Clean the coding plates and the sensors on the sensor board
with a Q-tip moisturized with Isopropyl or Isopropanol.
ATTENTION
Do not blow with pressurized air into the rotor - particles can be blown into the rotor and
block the rotation.
Summary of Contents for FP 25 E PREMIERE
