FP 25 E
Issue: 06/2011
12
»
Lens turret (option)
- 2 lenses and manual lens change
- 2 lenses and automatic lens and aperture change
- electronic focusing control (option)
- 3 lenses and manual lens change
- 3 lenses automatic lens and aperture change
- electronic focusing control (option)
»
Remote unit
- focusing control (option)
»
Film gate cooling unit (option)
»
Water cooling system (from 4000 W lamp capacity on)
»
Automation system (option)
- DMP 1 Digital Matrix Programmer
- CCA3 Cue Code Automation
- SA2 Sequence Cinema Automation
- EMK 1 Electronic Automation System
»
Pedestals
»
Reader for DOLBY / DTS / SDDS (option)
»
Control panel BWR (option)
»
Auditorium control panel (option)
»
Film cleaner (option)
»
Operating manuals
2 .3
Installation
ATTENTION
U
The projector will be delivered completely wired and factory tested.
U
Only use suitable hoisting machines (crane, fork-lift).
U
Do not use unit parts as climbing aid.
U
The electrical connections have to be in accordance with local regulations and be
installed professionally.
U
All installation should only be carried out by Kinoton service.
2 .3 .1 Place of Installation, Place of Operation
»
The place on which the unit will be installed must be even, solid and clean.
»
The figure on the next page shows the projector’s dimensions.
»
Requirements of the projection room:
- humidity:
40 to 60 %
- temperature:
15 to 25° C
- maximum sea level:
2000 m
Summary of Contents for FP 25 E PREMIERE
