FP 25 E
Operating Elements
Issue: 06/2011
47
4 .3 .3 Rotary Switch: Operating Mode
Switch in position
=> Projecting
Switch in position
=> Rewind, make-up, tear-down
Film break switch is active.
Switch in position
=> Making up with mechanical friction
Film break switch is inactive.
X
NOTE
Z
The film break switch is not activated.
Z
Threading information, see chapter 5.
4 .3 .4 Stop Button
Tearing down the program:
• Push stop button before reaching the end of the copy.
$
The friction drive stops. The upper/fore side friction drive (take-up friction)
will be activated after 10 seconds.
4 .3 .5 Potentiometer: Reel Speed
Turning the potentiometer anticlockwise => reel speed slows down
Turning the potentiometer completely to the left stop =>
reel speed slows down to zero.
Turning the potentiometer clockwise =>
start / reel speed accelerates
Turning the potentiometer completely to the right stop =>
maximum reel speed (approx. 10 min for 4000 m)
4 .3 .6 LED: Ready
The LED illuminates constantly, when potentiometer was turned to the left stop and the
spool tower is ready for operation.
STOP
Summary of Contents for FP 25 E PREMIERE
