FP 25 E
Issue: 06/2011
56
5 .2 .1 .3 Starting the Projection
• Switch on the power supply - main switch on spool tower to position “I”.
• Position the operating mode rotary switch to
.
• Adjust the spool size toggle switch depending on
(600 m) or
(- 5000 m).
• Pin up the full film spool onto the rear friction shaft (take-off friction) and an empty
spool on the fore side friction shaft (take-up friction).
• Fix both spools by screwing the knurled nuts onto the shafts.
• Thread the film corresponding to the threading instructions.
• Activate the frictions, by turning manually the film spool or by tensioning the film until
the lever arms reach their working positions (middle positions).
• Start the projector by pressing
.
5 .2 .1 .4 Ending or Stopping the Program
• Pressing
the projection can be stopped manually.
• Close the dowser by pressing the
button.
• The projector switches off automatically when the film is passed, because the film
break sensor is detecting no film.
Summary of Contents for FP 25 E PREMIERE
