FP 25 E
Safety Instructions
Issue: 06/2011
7
1 .6
Protective Devices
All existing safety devices must be checked regularly
1 .6 .1 Main Switch
In case of an emergency, you can switch off the projector using the main switch (under
the projector door). Push the switch to position “0”. The red lamp in the switch turns off.
1 .6 .2 IR Reflex Film Break Sensor
The film break sensor (arrow) switches off the projector when no film is passing the sen-
sor (e. g. at a film break). In this case the projector will be stopped.
X
NOTE
If your projector is equipped with an automation system the film break sensor can
trigger a run of events.
1 .6 .3 Film Stripper
The film stripper (arrow) prevents film
from winding around the sprocket after
a film break or loss of a tape fixing has
happened.
Film strippers are attached to all
sprockets.
Summary of Contents for FP 25 E PREMIERE
