FP 25 E
Operation
Issue: 06/2011
59
5 .2 .3 .2 Starting the Projection
• Switch on the power supply - main switch on spool rack to position “I”.
• Pin up the full film spool onto the rear friction shaft (take-off friction) and an empty
spool on the fore side friction shaft (take-up friction).
• Fix both spools by tilting the locking bar.
• Thread the film corresponding to the threading instructions.
• Switch on the friction drive - rotary switch on position “I”.
• Adjust the rotary switches (Fore Side / Rear Side) to the corresponding spool size
(600 m) or
(1800 to 5000 m) and to the corresponding tension directions (left or
right) which depend on the spool rotation direction.
• The friction drive is activated as soon as the film is tightly positioned in front of the
film break sensor.
• Position the rotary switch (on projector head) to Projection.
• Start the projector by pressing
.
5 .2 .3 .3 Ending or Stopping the Program
• Pressing
the projection can be stopped manually.
• Close the dowser by pressing the
button.
• The projector switches off automatically when the film is passed, because the film
break sensor is detecting no film.
Summary of Contents for FP 25 E PREMIERE
