FP 25 E
Issue: 06/2011
58
5 .2 .2 .3 Ending or Stopping the Program
• Pressing
the projection can be stopped manually.
• Close the dowser by pressing the
button.
• The projector switches off automatically when the film is passed, because the film
break sensor is detecting no film.
5 .2 .3 FP 25 E with Spool Rack (option with 2 friction drives)
5 .2 .3 .1 Threading Overview
1. put the
full film reel
onto the
rear friction shaft
2. thread the film through the guide
rollers on the
rear side extension
arm
3. thread the film via the
rear guide
roller on
the
projector head
4. thread the film through the f
ore
side guide rollers on
the
projector head
5. thread the film through the
feed sprocket
6. thread the film through
film gate
7. thread the film through the
reverse-scan sound device
8. thread the film through the
bottom sprocket
9. put the
empty film reel
on the
fore
side take-up friction shaft
and
wind up the film (2 - 3 windings)
X
NOTE
General threading through the film
gate, see chapter 5.2.1.2.
Summary of Contents for FP 25 E PREMIERE
