Kimberley KARAVAN 2021 Installation, Maintenance & Operating Manual Download Page 62

Page: 62 / 120

External Shower

The Karavan can be equipped with an external shower unit. This is located on the left hand side of the tailgate

section.

How to use the external shower:

1. Click connect the supplied shower hose to outlet

2. Turn on pumps inside Karavan at the dash control panel

3. Start Diesel hot water system if required

Lift the mixer tap to start water flow and twist to adjust temperature

Water System | Grey Water Tank

Your Karavan may be fitted with a Grey water tank which can receive water from your shower and internal sink

systems. Grey water can be either diverted to this grey water tank or directly to the outside environment via an

outlet pipe.

To capture grey water turn the flow valve to the “CLOSED” position and leave outlet pipe attached to the

chassis rail upper position.

To expel grey water from tank, turn the flow valve to the OPEN position and place outlet pipe hanging down

from chassis rail.

NOTE:

Ensure valve is closed and outlet

pipe is attached in upper chassis rail

position when travelling.

Summary of Contents for KARAVAN 2021

























































































































Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands

Kimberley KARAVAN 2021, Installation, Maintenance & Operating Manual

Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands