Kimberley KARAVAN 2021 Installation, Maintenance & Operating Manual Download Page 61

Page: 61 / 120

Visi-flow™ Water System - Using On-Board and External Sources

Using On-board (‘Tank’) water sources:

1. Activate power for water pumps 1 & 2

2. Ensure Valve Taps are in the following positions:

To use On-board water:

‘TANK’ is Inline (OPEN ) & ‘MAIN’ is Crossline (CLOSED )

3. Use water as desired

4. TURN PUMPS OFF WHEN NOT IN USE OVERNIGHT

or for an extended

time. (The auto feature of the taps and pumps means that as the

vacuum reduces the pump will come on automatically with a “Brrr” at

an unexpected time!)

Using External (‘Main’) water sources:

1. Activate power for water pumps 1 & 2

2. Ensure Valve Taps are in the following positions:

To use External water:

‘MAIN’ is Inline (OPEN ) & ‘TANK’ is Crossline (CLOSED )

3. Connect hose to ‘Visi-Flow’ water inlet & place hose into water source

(if using a natural water source—ensure that a filter is used on hose

to prevent sediment being sucked into system - See ‘Hose Filler Kit’) -

hose can also be connected to mains water.

4. Use water as desired

5. TURN PUMPS OFF WHEN NOT IN USE OVERNIGHT

or for an extended

time. (The auto feature of the taps and pumps means that as the

vacuum reduces the pump will come on automatically with a “Brrr” at

an unexpected time!)

CAUTION:

There are Health risks in pumping from external water sources like streams & billabongs. It is

recommended that you never drink or expose cooking utensils to water that is not potable unless

you are absolutely certain of the quality of the water. The stainless steel heat exchanger can be

flushed together with the lines but there is always a risk of bacteria in an unknown water source.

We recommend to never put unknown water into the ‘Drinking Water’ tank.

DO NOT DRINK THIS WATER UNLESS YOU ARE CERTAIN IT IS SAFE TO DO SO.

USING ON-BOARD WATER

‘MAIN’

OPEN

‘AUX’

CLOSED

USING EXTERNAL WATER

‘AUX’

OPEN

‘MAIN’

CLOSED

Summary of Contents for KARAVAN 2021

























































































































Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands

Kimberley KARAVAN 2021, Installation, Maintenance & Operating Manual

Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands