Kimberley KARAVAN 2021 Installation, Maintenance & Operating Manual Download Page 18

Page: 18 / 120

Testing Voltage from Vehicle Charging System

Note on Policy of Vehicle Charging and Batteries

If a customer does not have 14V at the connecting plug or their vehicle is not wired up at the time of handover

then Kimberley Kampers can’t warrant that the vehicle will charge the battery system in the Kimberley.

You must use a digital multimeter that shows at least one and preferable 2 decimal points. Please do the

check as follows.

VOLTAGE

Vehicle Idling

Vehicle revs increased

above idle (not very

much generally

Vehicle revs increased

above idle (not very

much generally)

and the LIGHTS are on

HIGH BEAM

Voltage Reading

If any condition results in the reading of less then 14V (ie: 13.9V is not acceptable) then the vehicle may not charge correctly and

may damage the batteries.

Towing—Wiring & Electricals 12V

7-Pin Round Trailer Connector Wiring Specifi cation

Terminal

No.

Connect to

Colour

Left fl asher lamps

Yellow

Reversing Indicators & Lights

Black

Earth

White

Right

fl asher lamps

Green

*Service brakes (auxiliary)

Blue

Stop lamps

Red

Tail, licence plate & clearance lamps

Brown

Kimberleys are wired to industry standard and feature

a 7-pin round connector (AS 2513). They may also

be fi tted with the Optional Anderson Plug for charge

current. (See below for wiring details).

Note:

For DC-DC charging of the batteries vehicle must be

equipped with proper wiring and circuit protection.

Trailer Lights/Brakes Cable

When plugging in the electrical cable, be careful that there is enough

fl exibility of the cable around the hitch; there is no cable exposed to the

exhaust; the cable is securely held at the vehicle end.

For safety on diffi cult terrain you may need to wrap some adhesive heavy

duty tape around the connector to the vehicle to ensure that it doesn’t

come out through vibration.

Anderson Charge Cable (Optional)

This is a permanent connection for enhanced battery charging. This exits

the chassis rail towards the front of the drawbar.

Electrical Connection

NEED PHOTO OF

HOOKED UP CABLE

1. Anderson Charge Plug 2. 7-Pin Round Connector

Summary of Contents for KARAVAN 2021

























































































































Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands

Kimberley KARAVAN 2021, Installation, Maintenance & Operating Manual

Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands