Kimberley KARAVAN 2021 Installation, Maintenance & Operating Manual Download Page 27

Page: 27 / 120

WiTi offers a revolutionary anti-theft system and is

the only anti-theft system designed specifi cally for

caravans and trailers fi tted with electric brakes.

WiTi replaces the cables and plugs connecting a tow

vehicle and trailer with an advanced wireless interface

- a Wireless Towing Interface plugged into a 12 pin

socket on the tow vehicle and a Communication

Module in the camper trailer or caravan.

The Communication Module is used to wirelessly

transfer the lighting and braking signals from the

Wireless Towing Interface to the Anti-Theft Unit and

then on to the lights and brakes of the caravan or

trailer (provided the units are within 10 meters).

To tow the trailer or caravan when the tow vehicle is

not equipped with a 12 pin trailer socket, a temporary

towing extension cable is included. This plugs in to the

tow vehicle socket and a trailer socket mounted under

the front storage box.

For more detailed information about operating the

WiTi System see the “Operating Instructions” in the

Owners Satchel.

WiTi Wireless Trailer Plug Connection with built-in Anti-theft & GPS tracking (Optional)

IMPORTANT:

Before towing - perform a safety check of indicators, clearance/running lights, brake lights

and brake operation.

1. Plug the

WiTi

Wireless Towing

Interface into the 12 pin socket

on the tow vehicle.

2. Pair the Wireless Towing

Interface and Communcation

Module (see instructions next

pages).

3. For temporary towing - connect

the towing extension cable to

vehicle and trailer or caravan.

TOWING WITH THE WiTi:

Summary of Contents for KARAVAN 2021

























































































































Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands

Kimberley KARAVAN 2021, Installation, Maintenance & Operating Manual

Search results

Summary of Contents for KARAVAN 2021

Reviews:

Related manuals for KARAVAN 2021

Brands by name

Popular brands